Steam production: 50 ÷ 300 kg/h
Nominal power: 31,7 ÷ 209,2 kW
Design pressure: 5 bar
Efficiency: > 91,0 %
Instantaneous reverse flame fire tube steam boiler, completely automatic and with high efficiency. Low water content and reduced dimensions make them the most suitable steam boiler for all small and medium installations.
At high load the internal separator prevents the entrainment of water droplets to the steam outlet, the steam produced is then always of high quality having a very high dryness fraction.
The generator has been designed in accordance with the strictest international safety regulations in force.
The boiler is available as flexible modular sections dependant on the range of required power.
The boiler can be equiped with programmable logic technology that allows complete compatibility with any data acquisition system, also allowing the adjustment of parameters through the display.
A wide range of optional accessories are available to customize the product to meet specific requirements.
The installation is very easy: you just need to connect the system to the electric, hydraulic, steam and discharge lines.
To make sure that the boiler is working within the desired conductivity parameters, it is necessary to take water samples and analyse them. To take precise samples in a safe…
Thanks to this system, the level in the boiler is constantly adjusted by a PID regulator that controls the speed of the supply pump with inverter. The water flow rate…
Global safety system designed and manufactured to ensure a total operating safety for steam boilers, in accordance with applicable regulations in terms of exemption from continuous supervision up to 72…
To maintain the minimum return temperature and the maximum flow/return ∆T within the allowed limits, a recirculation system is installed between the flow and return connections which recirculates a suitable…
Basamento accessoriato atto ad essere posizionato e fissato sul lato destro del generatore di vapore, e ad ospitare, oltre al quadro elettrico della caldaia (nr.2 quadri elettrici in caso di…
The TDS control system limits the level of salts and minerals dissolved in the boiler water within the value allowed by the manufacturer thus avoiding any risks of carry over…
Distribution headers are designed to allow economic distribution of the media (steam, water, thermal oil) to the individual users. The Distribution headers are individually designed to match the system requirements…
Design pressure 5 or 12 bar The VEX series steam accumulators are semi-fixed, horizontal, complete with accessories. Our accumulator receives steam from a boiler, therefore it has no internal coil…
Design pressure 5 or 12 bar The VEA expansion vessel has been designed to absorb the volumetric variations of the water in the system, due to the temperature increase. The…
Design pressure 12 (15 bar upon request) The EVX-series steam boilers are horizontal semi-fixed boilers provided with an exchange coil containing a primary fluid such as thermal oil or super-heated…
The BDV blowdown vessel has been designed to receive sludge that usually settle at the bottom of the steam boilers which is discharged during a bottom blowdown operation; this sludge…
Automatic system for the treatment of steam boiler make-up water, designed to prevent scale deposits and corrosioncaused by dissolved gases. The treatment includes a softening process by means of ion-exchange…
The DEG deaerators are devices at atmospheric pressure designed for the thermophysical degassing of the steam boiler feed water. The degassing process is performed by means of a controlled steam…
The condensate collection tank (VRC) has been designed to collect condensate returning from the steam system team and to mix it with the make-up softened or demineralised water. Entirely made…
The TDS control system limits the level of salts and minerals dissolved in the boiler water within the value allowed by the manufacturer thus avoiding any risks of carry over…
The backup pump is supplied to ensure the constant operation of the boiler, avoiding downtime in case of a main pump failure. The pump is installed in parallel to the…
This system ensures that the level in the boiler does not exceed the allowed value thus avoiding flood problems. It consists of a “fail safe” probe connected to an electronic…
Control panel with 15” touch screen for a personalised view of the heating plant room (synoptic diagram). The panel must be connected via bus to the boiler Eterm control panels…
The structure consists of carbon steel profiles connected by special joints that ensure their correct coupling. The upper handrail parapet is suitably made and fixed by housings welded to the…
To download the technical documentation you must be logged in.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
There are no case studies for this boiler.
Service Service Through this service the customer can request support from ICI Caldaie for personalized assistance.The service allows...
Service Service With the new Assistance Services, specific for the different types of generators and the impact they...
Service Service Once the installation has been completed, it is possible to request a test of the system...
Service Service Through this service the customer can agree a personalized Spare Parts List with ICI.The service allows...
Service Service ICI offers its customers a rental service for steam, hot water, superheated water and diathermic oil...
Service SECTOR: Pre-Sale Service ICI, through its technical-engineering team, offers a design and construction service for the entire...
Service SECTOR: Pre-Sale Service ICI provides the customer with highly specialized personnel capable of evaluating the requests of...
If you need further information, samples, a quote or advice for a project, please fill out the form below and we would be happy to help.
Instantaneous steam boiler – easy to install and user-friendly. Ideal for facilities such as laundries, it meets small...
Steam production: 20,3 ÷ 244,2 kg/h
Nominal power: 15 ÷ 180 kW
Design pressure: 4,5 bar
