FLASH

Electrically powered instant steam boiler

Home | Prodotti | Industrial Boilers | FLASH

Steam production: 20,3 ÷ 244,2 kg/h

Nominal power: 15 ÷ 180 kW

Design pressure: 4,5 bar

Download PDF

Description

Instantaneous steam boiler – easy to install and user-friendly. Ideal for facilities such as laundries, it meets small and medium demands for dry steam, from 15 to 180 kW, and prevents thermal system overloads.It is particularly suitable for the operation of ironing presses with a polished surface or a special steam gun., It is suitable for steaming or ironing of fur coats.

Certifications

Available Technologies

Advantages

Modular versions

The boiler is available as flexible modular sections dependant on the range of required power.

Easy, fast and safe installation

The installation is very easy: you just need to connect the system to the electric, hydraulic, steam and discharge lines.

Easy to use

The boiler interface is user-friendly thanks to the control panel located at the front.

Boiler Accessories

Salinity Control Unit

The TDS control system limits the level of salts and minerals dissolved in the boiler water within the value allowed by the manufacturer thus avoiding any risks of carry over…

Backup Supply Pump

The backup pump is supplied to ensure the constant operation of the boiler, avoiding downtime in case of a main pump failure. The pump is installed in parallel to the…

Self Monitoring High Level Alarm Kit

This system ensures that the level in the boiler does not exceed the allowed value thus avoiding flood problems. It consists of a “fail safe” probe connected to an electronic…

Eterm Easy Manager Panel

Control panel with 15” touch screen for a personalised view of the heating plant room (synoptic diagram). The panel must be connected via bus to the boiler Eterm control panels…

Ladders and Platforms

The structure consists of carbon steel profiles connected by special joints that ensure their correct coupling. The upper handrail parapet is suitably made and fixed by housings welded to the…

Boiler Room Ancillaries

COV

Distribution headers are designed to allow economic distribution of the media (steam, water, thermal oil) to the individual users. The Distribution headers are individually designed to match the system requirements…

VEX

Design pressure 5 or 12 bar The VEX series steam accumulators are semi-fixed, horizontal, complete with accessories. Our accumulator receives steam from a boiler, therefore it has no internal coil…

VEA

Design pressure 5 or 12 bar The VEA expansion vessel has been designed to absorb the volumetric variations of the water in the system, due to the temperature increase. The…

EVX

Design pressure 12 (15 bar upon request) The EVX-series steam boilers are horizontal semi-fixed boilers provided with an exchange coil containing a primary fluid such as thermal oil or super-heated…

BDV

The BDV blowdown vessel has been designed to receive sludge that usually settle at the bottom of the steam boilers which is discharged during a bottom blowdown operation; this sludge…

ADD

Automatic system for the treatment of steam boiler make-up water, designed to prevent scale deposits and corrosioncaused by dissolved gases. The treatment includes a softening process by means of ion-exchange…

DEG

The DEG deaerators are devices at atmospheric pressure designed for the thermophysical degassing of the steam boiler feed water. The degassing process is performed by means of a controlled steam…

VRC

The condensate collection tank (VRC) has been designed to collect condensate returning from the steam system team and to mix it with the make-up softened or demineralised water. Entirely made…

Attachments

To download the technical documentation you must be logged in.

Login

Have you lost your password?