Ferrari & Franceschetti SPA

Case Study

Type: Industrial Boilers

Sector: Food&Beverage

Country: Italy

THE PROJECT

The initial request of the customer involved the resolution of the problem of having a back-up steam boiler to the existing one that had a producibility adequate to the needs and a high efficiency to reduce consumption.
Previously, the plant consisted of an old-generation, flame-reversing steam boiler, which, due to age limitations, required repairs that were too expensive to deal with. In addition, a relatively recent steam boiler with 3 t/h producibility at three-pass steam boiler.

THE SOLUTION
After careful analysis, ICI Caldaie proposed a GSX series boiler with a power of 2.5 t/h, lower than the one installed, equipped with a 1st stage economiser, for pre-heating of the feed water and an additional 2nd stage for water pre-heating of the water collection tank. To date the customer uses this generator as primary with considerable benefits on consumption and plant management costs.

Boilers installed

The SIXEN N range consists of monobloc reverse flame wet back fire tube steam boilers. This range is...

Steam production: 350 to 5000 kg / h

Nominal power: 238 ÷ 3407 kW

Design pressure: 12 or 15 bar

Efficiency: > 90.0%

The TNOX range includes three pass, wet back boilers with low thermal load in the combustion chamber (between...

Nominal power: 2500 ÷ 25000 kW

Design pressure: 6 bar

WH

The waste-heat boilers of the WH range recover energy from hot flue gases as heat source without any...

Nominal power: 100 ÷ 20000 kW

Design pressure: from 1 to 25 bar

Would you like to know more?

If you need further information, samples, a quote or advice for a project, please fill out the form below and we would be happy to help.